Hydraulic Power Press (Fix Body Type)

Hydraulic Power Press (Fix Body Type

Hydraulic Power Press (Fix Body Type

Frame :- The frame is Fabricated from steel plates with heavy wide and full cross rib borders.


Clutch :- The clutch is round key type with single and continuous strokes system. The key and clutch ring is made of EN 24 steel and its parts are tempered.


Gears :- Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.


Crank Shaft :- Crank shaft made of a very special alloy steel. It moves very easily in Gun Metal buses.


Table and Ram :- Table and Ram are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned to other to obtain high accuracy and precision operation.


Lubrication :- An efficient shot lubrication system has been provided for lubrication the sliding surfaces.

Specifications for Hydraulic Power Press (Fix Body Type)

Description 10 Ton 20 Ton 30 Ton 50 Ton 75 Ton 100 Ton 150 Ton 200 Ton
Crank Shaft Diagram 60 70 83 95 114 127 152 158
Stroke Adjustment 6-50 10-63 13-75 13-100 13-125 13-125 13-140 13-152
Side Adjustment 25 40 40 50 60 60 70 70
Hole in Ram 25.4 31.75 38.1 44.75 50.8 57.18 63 63
Hole in Bed 76 89-108 102-127 127-152 178-203 191-216 216-241 216
Length and Width of Ram Floor 230 X 150 280 X 175 330 X 230 380 X 228 457 X 280 530 X 318 610 X 366 700 X 410
Length and Width of Bed 406 X 254 500 X 310 555 X 365 660 X 406 762 X 533 864 X 610 965 X 660 1067 X 711
Fly Wheel Diagram
Geared / Double Geared 406 508 559 660 812 864 1016 1120
Dist. Bed to Ram 200 230 255 280 330 380 410 432
Dist. Bloster Plate to Ram 250 290 325 365 420 470 510 532
Stroke Per Minute 80 55 40 30 30 30 30 30
Floor to top of Bed 725 815 815 900 915 915 915 915
Weight Approx. KGs. 475 1000 1300 2500 3500 5200 7000 9000