Hydraulic Power Press (Pillar Type)
Frame :- The frame is Fabricated from steel plates with heavy wide and full cross rib borders.
Clutch :- The clutch is round key type with single and continuous strokes system. The key and clutch ring is made of EN 24 steel and its parts are tempered.
Gears :- Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.
Crank Shaft :- Crank shaft made of a very special alloy steel. It moves very easily in Gun Metal buses.
Table and Ram :- Table and Ram are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned to other to obtain high accuracy and precision operation.
Lubrication :- An efficient shot lubrication system has been provided for lubrication the sliding surfaces.
Specifications for Hydraulic Power Press (Pillar Type)
Description | 10 Ton | 15 Ton | 20 Ton | 30 Ton | 50 Ton | 75 Ton | 100 Ton | 150 Ton | 200 Ton |
---|---|---|---|---|---|---|---|---|---|
Crank Shaft Diagram | 60 | 70 | 76 | 83 | 95 | 114 | 127 | 152 | 158 |
Stroke Adjustment | 6-25 | 10-38 | 13-51 | 13-63 | 13-76 | 13-102 | 13-144 | 13-127 | 13-152 |
Hole in Ram | 25.4 | 31.75 | 31.75 | 38.1 | 44.75 | 50.8 | 57.18 | 63 | 63 |
Hole in Bed | 76 | 89 | 89 | 102 | 127 | 178 | 191 | 203 | 216 |
Length and Width of Bed | 355 X 406 | 406 X 457 | 457 X 508 | 508 X 559 | 560 X 610 | 610 X 762 | 600 X 813 | 711 X 914 | 762 X 965 |
Dist. Bed to Ram | 180 | 205 | 230 | 266 | 290 | 330 | 381 | 410 | 432 |
H.P. Required / RPM 1440 | 1 | 1.5 | 2 | 3 | 5 | 7.5 | 10 | 15 | 20 |
Floor to top of Bed | 730 | 740 | 815 | 825 | 900 | 915 | 915 | 915 | 915 |
Weight Approx. KGs. | 400 | 600 | 800 | 1000 | 2000 | 3100 | 4600 | 5650 | 9000 |